Special interior paint

Spring and summer are the best times to paint and whitewash the walls of your home. However, it is often difficult to understand which paints to use depending on the rooms that make up the house: the living room, the kitchen, the bedroom, the bathroom and so on.

Another obstacle that is often faced by those who are beginners or have little experience in painting and whitewashing is all the work that goes before painting, i.e.: preparing the surface, how to use the paints, tools to be used for specific products and all that what concerns it.

Below we will recommend some products selected by BRICHOME with a detailed description of the application methods, the most suitable environments, surface preparation procedures, etc.

Often small precautions before and during painting make the job much easier and amplify the result.

BRICHOME recommends two excellent products from the V33 brand:

EXPERT BREATHABLE WATER-BASED PAINT Of V33

INTENDED USE:
Water-based paint ideal for particularly humid and poorly ventilated environments such as bathrooms and kitchens.

PROPERTY':

• It guarantees excellent coverage, masking power and breathability.
• It is easily applied to walls and ceilings.
• With high covering and filling power, ideal for stabilized finished walls.
• Grease resistant.
• High breathability.

EXPERT WASHABLE WATER-BASED PAINT Of V33

INTENDED USE:

Water-based paint ideal for all home environments.

PROPERTY'

• Washable water-based paint perfect for plaster, smoothing with stucco, plaster, plasterboard.
• It adheres perfectly to all types of masonry and to old, non-peeling and well-adhering paint.
• Good washing resistance and high breathability
• Excellent white point
• High filling power
• Anti-glare

PREPARATION:

The support preparation phase is an essential step to obtain a quality final result:

• The surfaces to be treated must be dry, perfectly clean and dry.
• Completely eliminate any traces of dust, oil, grease and loosely adhering parts.
• Fill any cracks.
• Level any irregularities in the substrate with suitable preparation products.

SURFACES CONDITIONS:

For new and healthy wall surfaces:

• Preparation: apply a diluted wall sealant (we recommend HYDROCRYL Of BOER).
• Painting: After 8-12 hours from applying the insulation, apply at least two coats Of EXPERT BREATHABLE WATER-BASED PAINT or EXPERT WASHABLE WATER-BASED PAINT diluted, respecting the drying times between one application and another.

For wall surfaces already painted with well-cohesive paints:

• Preparation: remove any part of the old paint that is no longer adhering. In case of mold, treat with a specific sanitizer for walls. (we suggest LASER 23 Of BOER). Grout, if necessary, and clean from all traces of dust and dirt. Apply a correctly diluted sealant (we recommend HYDROCRYL Of BOER).
• Painting: After 8-12 hours from applying the insulation, apply at least two coats Of EXPERT BREATHABLE WATER-BASED PAINT EXPERT WASHABLE WATER-BASED PAINT diluted, respecting the drying times between one application and another.

For wall surfaces already painted with tempera paints:

• Preparation: scrape the previously moistened tempera paint and smooth out the support with smoothing. Apply a correctly diluted sealant (we recommend HYDROCRYL Of BOER).
• Painting: : After 8-12 hours from applying the insulation, apply at least two coats Of EXPERT BREATHABLE WATER-BASED PAINT EXPERT WASHABLE WATER-BASED PAINT diluted, respecting the drying times between one application and another.

For wall surfaces in poor condition:

• Preparation: Remove the old paint that is no longer adhering. Carry out any smoothing to level the surface. Apply a correctly diluted sealant (we recommend HYDROCRYL Of BOER).
• Painting: : After 8-12 hours from applying the insulation, apply at least two coats Of EXPERT BREATHABLE WATER-BASED PAINT or EXPERT WASHABLE WATER-BASED PAINT diluted, respecting the drying times between one application and another.

Discover all Brichome's recent blogs and all the news on our social channels.